A single timer can be set on the Time Timer Watch, but it can be set to repeat at the interval you choose. To set a Custom Timer on your Time Timer Watch, please do the following:
- Press "Mode" until you are in Timer mode (a portion of the red disk will display).
- Press the Set button for three seconds until the time begins to flash. Then use the plus and minus buttons to set the duration of your timer and press Next to confirm. A custom timer can be set to any duration between 1 minute and 99 hours 59 minutes, in 1-minute increments.
- Then use the plus and minus icons to choose the type of alert that will occur when time runs out (vibrate, audible or both). Press Next to confirm.
- Then, use the plus and minus buttons to select Custom Timer. This is shown with the full circle or partial circle icons.
- Press Next to confirm.
- Indicate if you would like the timer to repeat or only count down once. This is indicated by the circle arrow or dash icon.
- Press Next to confirm.
- Push the Set button down to secure the Custom Timer you have created.
- Start the Timer by pushing the red start/stop button.
To learn how to use all the features of the Time Timer Watch, we recommend you watch the video below.