Time Timer Visual Scheduler User Guide

1. INSTALL 2 AA BATTERIES

The battery compartment is located on the back of the Time Timer® Original 8". Simply pull down from the top of the battery compartment to insert batteries.

2. CHOOSE YOUR SOUND PREFERENCE

The timer itself is quiet–no distracting ticking sound–but you can choose whether or not to have an alert sound when time is complete. Simply use the red on/off switch on the back of the timer to control audio alerts

3. PLACE TIMER IN ACCESSORY

Slide timer into slot on back of Visual Scheduler accessory and gently push forward to lock in place. (The Time Timer® Visual Scheduler accessory fits all Time Timer® Original 8" Timers.)

4. PLACE CLIPS AND ACTIVITY CARDS

Gently slide the clips into the inner opening until they snap in place. Clips should slide freely around lip to indicate time blocks. Choose activities from the provided activity cards, or use your own. Slide the activity cards under the clips.

5. WRITE ON DRY ERASE SURFACE

The dry erase surface and included dry erase marker allow endless possibilities for your visual schedule. Dry erase marker, clips, and activity cards can be stored in caddy on back when not in use.

6. SET YOUR TIMER

Use the center knob to turn the red disk counter-clockwise until you reach your chosen amount of time. Immediately, your timer will begin to countdown, and a quick glance will reveal the time left thanks to the brightly colored disk.