Time Timer® TWIST with Kickstand User Guide

1. INSTALL ONE AAA BATTERY 

The battery cover is located on the back of your Time Timer® TWIST. Simply lift battery cover up to insert AAA battery into compartment.

If you still need help, please review how to replace the AAA battery in my TWIST

2. SET YOUR TIMER

Gently turn the outer ring counterclockwise to set your desired time. When you turn counter-clockwise, the Time Timer® TWIST will first display the time from 0-60 seconds and then from 1 minute up to 90 minutes. Once set, the entire disk will represent the duration you chose.

3. SET YOUR VOLUME

Using the switch on the back of your Time Timer® TWIST, choose your desired volume setting for your alert (Off/Low/High).

3. START OR PAUSE YOUR TIMER

Press the Play/Pause button to start your Timer Timer® TWIST. When the time is complete, the TWIST has a continuous alert and will beep until the Play/Pause button is pressed again, or for one minute.

4. BATTERY PRESERVATION

If any time remains, the Time Timer® TWIST display will stay on until it is time to replace the battery. We recommend removing the battery when not in use.

If the TWIST is set to 00:00 and left untouched for more than 3 minutes, the unit will go into sleep mode.