Articles in this section

Time Timer® MOD + Protect Case User Guide

  • Updated
IMG_3129.JPG
 

  1. INSTALL ONE AA BATTERY

    The battery cover is located on the back of the MOD. Simply lift battery cover up from the bottom edge to insert AA battery into compartment. Close battery compartment by pressing closed until you hear a "click".

Screenshot 2024-05-30 at 3.22.14 PM.png
 

2. CHOOSE YOUR SOUND PREFERENCE

The timer itself is quiet—no distracting ticking sound—but you can choose whether or not to have an alert sound when time is complete. Simply use the on/off switch on the back of the timer to control audio alerts. 

Screenshot 2026-01-12 at 4.01.49 PM.png
 

3. SET YOUR TIMER

Turn the center knob on the from of the timer counter-clockwise until you reach your chosen amount of time. Immediately, your new timer will begin to countdown, and a quick glance will reveal the time left thanks to the brightly colored disk and large, easy-to-read numbers.

   

ADDING OR REPLACING A PROTECT CASE

A durable and playful way to protect your new MOD. The MOD Protect Case Accessory is designed to absorb shock from all angles and fits any Time Timer MOD. To add or replace a Protect Case Accessory, (if your MOD currently has a silicone case accessory) gently peel back the silicone case accessory to remove the case accessory from the MOD. Then orient your case (with Time Timer wordmark facing up) and gently place the MOD in the Protect Case making sure to pull all edges around the front lip of the MOD.

 

Related articles