Time Timer MAX User Guide

1. Install 2 C Batteries

The battery compartment is located on the back of the Time Timer® MAX. Simply lift battery cover open from right side to insert batteries into compartment. Close battery compartment by pressing closed until you hear a “click”.

2. Choose Face and Time Duration

Insert your finger through the hole on the back of MAX and push out all three two-sided timer faces. Place the selected timer face (or dry erase face) on the top and then snap them back in place, one face at a time. Turn the time duration dial on the back of the MAX to match the total length of time represented on the selected timer face or written on dry erase face.

3. Choose Your Sound Preference

Using the red switch on the back of the MAX, choose your desired volume setting: no alert, low, or high

4. Set Your Timer

Use the center knob to turn the red disk counter-clockwise until you reach your chosen

amount of time. Immediately, your new timer will begin to countdown, and a quick glance will reveal the time left thanks to the brightly colored disk and large, easy-to-read numbers.

Create time blocks on any face by snapping set markers in the grooves between the red disk and numbers.